6 Solutions | Whirlpool Dishwasher Not Drying

6 Solutions of whirlpool dishwasher not drying

Is your Whirlpool Dishwasher not drying? Are you tired of Dishwasher not drying issue? Then you have come to the right place.

Dishwasher not drying is rarely found in Whirlpool dishwasher. However, the problem is not that big to worry about. It can be fixed using simple tips and tricks. 

There are various reasons that could encounter these Drying issues on Whirlpool dishwasher.

Therefore, today in this article, we will be discussing multiple reasons and their solution to fix Dishwasher not drying issue with step-wise instruction. 

Why my Whirlpool Dishwasher is not Drying?

Most manufacturers suggest liquid rinse is an effective trick to solve Dishwasher not drying issue.

But, it is not necessary that this solution is viable for every dishwasher model. It may not work in every Dishwasher; there could be some internal problem with the Dishwasher. 

Another common solution for this problem is by increasing water temperature or pressure inside the Dishwasher.

I hope that you have followed both the tricks. If the problem persists after going through these tips, I suggest you call technicians to fix the issues. 

Is your Dishwasher showing an error code?

Nowadays, every new model of Dishwasher has this fantastic feature to identify the problem inside the Dishwasher.

If you are using a newer model of Dishwasher, then I am sure your Dishwasher has this feature. You might be wondering why I am talking about error codes in the drying issue. 

Well, if your Dishwasher is showing error codes, then, first of all, consider eliminating all the error codes from your Dishwasher.

If you don’t know the meaning of the error code, then you can easily find it in the user manual. Moreover, the user manual contains step-by-step instructions to fix every error code. 

Sometimes there might be something else going on in your Dishwasher, which could be encountering drying issues on your Whirlpool dishwasher.

Therefore, I will suggest you eliminate error codes on your Dishwasher if they persist. 

Reasons for Whirlpool Dishwasher not Drying

Here we have brought a list of problems that could cause the Whirlpool Dishwasher Not Drying issue. In this section, we will take a deep look into these problems along with a solution.

Improper Loading of Dishes

Improper loading is one of the common reasons that could cause this drying issue. You might be wondering how Improper loading could cause a Drying problem in your Dishwasher.

When you load the dishes improperly in your Dishwasher, the air can’t circulate freely around the dishes, leaving moisture on the dishes. 

Therefore, I suggest arranging the dishes according to the sizes and recommended racks. There are three types of shelves on the Whirlpool dishwasher Upper, Bottom, and Silver basket racks.

You need to arrange the dishes depending upon the racks; then, only the moist will dry from your dishwasher racks. 


If the problem is improper loading of dishes, then all you need to do is arrange the dishes on recommended racks. Here is how you should place dishes depending upon the racks. 

Upper Racks

The top rack is designed for keeping glasses, bowls, and other smaller utensils. But, place the utensils in such a way that it doesn’t get a chance to store water onto them. You can place the dishes upside down to prevent this issue. 

Bottom Racks

The bottom rack of the Dishwasher is such a place where you will find the reach of spray arms. Therefore, I suggest you keep all the utensils that store water on the bottom racks. 

Silver Basket Racks

In the silverware basket, I suggest you place utensils like a spoon, knife, and Dinner forks. But, make sure to place them properly; otherwise, the sharp edges of the knife could cut your finger or hand. 

Faulty Vent

A faulty vent is another major reason that prevents your Dishwasher from drying out dishes. During the cycle, the dishwasher vent remains open to direct the hot and moist air outside the Dishwasher.

When the vent starts to malfunction, the humid air gets trapped inside the Dishwasher, causing moisture on the dishes. 

Dishes won’t dry if the vent malfunction or stops working in the middle of nowhere.

There are various reasons which could cause the vent to fail from the Dishwasher. A clogged vent is one of the significant reasons that could stop the vent from passing moist air. 


The solution for a faulty vent is to replace or remove defective parts with a working one. But, in most cases, the air vent might stop working when it is clogged. So, here is the step-wise instruction to fix the clogged vent from the Dishwasher.

1.     First of all, Mix ½ cup of white vinegar and add 1 teaspoon of baking Soda. 

2.    After this, dip cotton buds inside the vinegar and baking soda solution.

3.    Now use these cotton buds to clean all the steam vents.

4.    Clean all the accessible areas inside the vent. This will remove all the clogged things from the dishwasher entry hole. 

This is how you can fix the clogged vent from the Dishwasher. The process is very similar; all you need to do is clean the clogged steam vent from the Dishwasher.

After this, the steam vent should pass all the moist air from the Dishwasher. 

Wrong Unloading

If you unload the dishes randomly, then there is a high chance your dishes won’t dry after the cycle. Actually, it is not an issue or problem with the Dishwasher. The problem is unloading the dishes in the wrong way. 

When you remove dishes from the upper racks, tiny water droplets will fall into the bottom racks, making the dishes wet. Therefore, the solution to this problem is to unload the dishes properly. 


Most dishwasher manufacturers recommend unloading dishes from bottom racks. When you unload dishes from lowermost racks, water droplets from lower shelves will fall in Dishwasher.

Similarly, when you remove dishes from uppermost racks, the water droplet or debris will fall directly in the lowermost rack utensils. 

Use less Plasticware

Plastic items are not recommended to load in the Dishwasher. If you hate using your hand to wash plastic dishes, then run the cycle at a lower temperature.

When you run the cycle at a high temperature, it will degrade the quality of plastic dishes. 

Unlike other utensils, plastic utensils are not that to resist heat, and they are very much hard to dry compared to other utensils. Before the utensils dry, the cycle on the Dishwasher ends, which leaves dishes wet.

Use Rinse aid

Rinse aid is one of the effective ways to assist your Dishwasher in drying out dishes. Rinse aid prevents the moisture buildup inside the Dishwasher, which lets your Dishwasher dry dishes.

If your Whirlpool Dishwasher Not Drying properly, consider using a rinse agent dispenser to dispense Rinse aid.

It is one of the effective ways to prevent moisture buildup and prevent dishes from getting wet. Besides this, it also helps you remove stubborn debris and oil from the dishes. 


If you don’t know how to rinse aid, then don’t worry. In this section, we will discuss step-wise instructions to use Rinse aid.

1.     First of all, open the dishwasher door.

2.    Open the dispenser knob from the Dishwasher.

3.    Now pour detergent on the dispenser knob and make it full to the recommended level. 

4.    Now close the dispenser container using a knob and lock it up. 

5.     After this, close the dishwasher door and then reset the factory set at 2 or 3. If there is a drying issue, set it to the highest setting.

If you have followed the above step correctly, the problem should be fixed. Now run the cycle from the beginning and see if the problem persists or not. If the problem persists, then look to the next problem listed below. 

Heated Dry not selected

Most of the newer model of whirlpool dishwasher comes with this heated dry feature. The heated dry feature lets dishes dry out after the cycle.

In some models of Whirlpool dishwashers, this feature might be labelled as the Auto Dry button near the control panel. 

Heated dry features can be accessed from the control panel. Depending upon the model, this feature comes in different settings.

In some models, heated dry is specified on a single button. Similarly, in some models, you need to toggle the button between high and low.

When you enable the heated dry option, your Dishwasher will take a bit more time to complete a cycle. 


If you have not enabled heated dry in your Dishwasher, then consider enabling a heated dry option in your Dishwasher.

Depending upon the dishwasher model, there are different ways to activate the heated dry. 

But, in most dishwashers, all you need to do is press the button, and then it will be activated on the Dishwasher.

If you didn’t find the heated dry button, then make sure to check the dishwasher user manual. There you will find ways to activate or access this feature. 

Faulty Heating element

The faulty heating element could also be the reason for the Whirlpool Dishwasher Not Drying problem.

If your Whirlpool Dishwasher Not Drying or releasing hot water, there could be a problem with the heating element. A heating element can be damaged or malfunction when it gets old. 

The heating element is located on the bottom side of the Dishwasher. If there is visible damage to the heating element, you need to change it. The heating element can burn out when operating at a higher temperature for a long time. 


Before considering the heating element as the reason, we need to inspect and see the element. If there is corrosion or cracks on the heating element, you need to change it. Here is step-wise instruction to change the heating element in the Dishwasher. 

1.     First, turn off the power supply and water supply on the Dishwasher.

2.    Now open the dishwasher door and remove all the racks from the Dishwasher.

3.    After this, the lower access panel from the Dishwasher. You need to have a screwdriver to remove the panel. 

4.    Disconnect the water supply line from the inlet valve.

5.     Now take out the Dishwasher from the cabinet. Be careful while pulling it could damage the dishwasher parts while doing so. 

6.    Tilt the Dishwasher down right to access the heating element.

7.     On the lower side, you should see two wires going inside the Dishwasher. Pull that wire from the Dishwasher.

8.    Now remove the heating element mounting nut. 

9.    Turn the Dishwasher upright, open the dishwasher door, and pull the heating element from the Dishwasher. 

10. Insert the new heating element on the Dishwasher using the same process you followed while removing.

This is how you can remove and install the heating element in your Dishwasher. The method to remove or replace the heating element can be challenging if you don’t have technical knowledge. Therefore, if there is a problem with a heating element or needs to be replaced, consider changing it.

May Required in Future:- 


There are various reasons why the Whirlpool Dishwasher Not Drying. We have discussed all these reasons with a solution to help you fix the issue with your Dishwasher.

Before resolving the issue, identify the problem and then go towards the solution. It is an effective way to fix the Dishwasher, not the drying issue.

I hope that the article was helpful for you in identifying the problem related to the heating issue on your Dishwasher. 

Frequently Asked Questions

Why does my Drying Dishwasher stop drying?

The Dishwasher could stop drying for various reasons like faulty heating elements, clogged steam vent, not using the heated dry mode, and other various reasons.  

How to fix Dishwasher not drying issue?

First of all, identify the problem causing your dishes not to dry. After this, look into the user manual about the issues. If the solution is not available, ask for customer support or call technicians. 

What is the heating element in the Dishwasher?

The heating element is the dishwasher dryer that heats the water during the cycle. It is located at the bottom of the Dishwasher and connects with a water supply pipe for heating water. 

Why do my dishwashers not dry plastic?

The Dishwasher does not effectively dry plastic like regular dishes. Plastic has a lower low thermal mass than ceramic and metal. Therefore, it is hard for plastic to dry fast on the Dishwasher. 

I am Kevin Technician and this website is created with the purpose to help common people to find proper information about Dishwasher. Feel free to comment or email your queries.