In recent times, the dryer has become one of the most common home appliances.

A dryer not only helps us dry our clothes in a short time but also saves a lot of time and effort.

Dryers come with loads of modern technology and smart sensors to track the drying time according.

However, due to the massive use of technology and electrical components, dryers are prone to malfunctions.

Having to deal with this can be quite irritating. It is not uncommon for Samsung dryers not to spin, which causes you to be unable to dry your clothes on time.

So below, we have discussed the top 11 common reasons why Samsung Dryer is Not Spinning and how to fix it. Let’s dive in!

11 Common Reasons Why Samsung Dryer Not Spinning

1.No Power Supply

Before proceeding to the deep troubleshooting of the Samsung dryer, you should check the basic stuff like if the dryer is getting power and the cable is properly plugged in, etc.

To quickly check if the dryer is getting power supply or not, you can simply open the door and unplug the unit from power.

Wait a few seconds, and then plug it back in. If it comes on and the drum begins to spin, the problem is almost certainly related to the control panel or settings and can be easily corrected.

If it doesn’t, the problem is almost certainly related to an issue with the wiring or outlet.

If the plug is properly plugged in and the dryer is getting power, but you are seeing error codes 9C1, 9E1, 9E, or 2E, then this basically means that the machine is not getting proper voltage supply.

Moreover, these error codes occur when the breakers are tripped. On top of that, you can check if the power cord doesn’t have any cuts in between.

How to Fix Power Supply Issue in Samsung Dryer?

Improper Voltage Supply: If you are getting improper voltage issues, then you need to check if other appliances are getting proper supply or not. You can use a voltage stabilizer to fix the improper voltage issue in the Samsung dryer.

Because improper voltage supply can cause Samsung dryer not to spin issues, you will need to set the voltage supply to 240 volts as most Samsung dryer requires 240 volts of power.

Tripped Breakers: If your home’s circuit breaker is tripped, you will likely see these error codes. You can simply reset the circuit breaker or your a new circuit breaker box to fix the Samsung Dryer not spinning issue.

2. Incorrect Dryer Settings

If there is no issue in the power supply of the dryer, but you are still getting the Samsung dryer not spinning issue, the next thing you need to do is check the settings and make sure they’re correct.

A common problem people run into is selecting the wrong settings for their type of load, which can cause a variety of issues.

For instance, many people only use the “Normal” setting for all of their clothing, but this setting can sometimes cause issues with bulky or heavy items.

If you have heavy clothes that are causing the dryer to overheat, they won’t begin spinning.

You may also have issues with delicate fabrics if you aren’t using a lower heat setting.

In such cases, you may see some error codes on the dryer’s display panel.

The error codes comprise numbers and letters, and to solve them, you need to check the user manual.

After performing the steps given in the manual, ensure you restart the dryer 2-3 times.

If you are still not able to use the dryer and still see the error codes, you may reset the unit to the factory settings, and hopefully, it will work again.

3. Door Switch Not Functioning

If the Samsung dryer not spinning issue still persists, that is because the dryer’s door is defective or it is not functioning properly

. The dryer door signals a dry cycle to begin. But if the door is defective, the dry cycle with not begin.

You can check this issue by closing the dryer’s door and checking if the lights are still on or not.

If the lights don’t go off, then the door is defective, and it requires a replacement.

4. Dryer Belt Worn Out

If your dryer is spinning, but the drum isn’t turning, the belt may be worn out, loosened, or broken.

This is a common issue with Samsung dryers, and if it breaks, it can cause all kinds of problems, such as the Samsung dryer not spinning.

With some basic knowledge and the right tools, you may be able to replace most dryer belts yourself.

To replace a worn-out belt in a Samsung dryer, remove the top panel of your dryer and look at the belt.

If it appears to be loose or broken, replace it immediately with a new one from an authorized repair centre.

5. Drive Motor Failure

The drive motor is what turns the drum, and if it fails, the drum won’t turn at all. If you open your dryer and find that the drum isn’t turning, the motor is probably broken.

To check if it’s a drive motor failure, you need to listen to any sound coming from the dryer while pushing the power button.

If you listen to any hums sound but not starting up, it is probably because there is an obstruction in the blower wheel and not in the motor.

However, if you don’t listen to any sound after pressing the power button, then it is highly likely because of a failed drive motor, and this is the reason why Samsung Dryer is not spinning.

If the motor is broken, you’ll need to replace it, which will require you to remove the dryer and disconnect the wires.

Moreover, it is a complex job and requires professional skills and tools, so it is better to get in touch with a technician rather than fix it yourself.

6. Broken Idler Pulley

The idler pulley is a wheel that contacts the dryer drum and turns it. If the drum isn’t turning, the pulley may be broken. This can happen if the belt breaks or stretches out over time.

If you are facing the Samsung dryer not spinning issue, you can check to see if the pulley wheel is broken by opening the dryer door.

Apart from being broken, a dryer pulley can also lack lubrication, due to which it will stop functioning. You will hear a strange noise coming from the Samsung dryer if there is a lack of lubrication in the idler pulley.

In such circumstances, you can simply use any lubrication to lubricate the pulley and clean the residue, and it will hopefully start functioning again.

7. Worn Out Drum Roller

The drum roller is what the belt runs on, so if it’s worn out, the belt won’t reach the drum, and the drum won’t spin.

Most Samsung dryer comes with a set of drum rollers. The Samsung dryer not spinning issue will occur if the drum rollers are worn out.

If the drum isn’t spinning, you can check the roller to see if it’s worn out. You can remove the belt and rotate the drum roller manually to check for potential wear. If the rollers are worn out, you’ll need to replace them.

Like the idler pulley, the roller is usually easy to access and replace. Moreover, it is highly recommended to replace all the drum rollers as a preventive measure.

8. Worn Out Drum Axle

If the Samsung Dryer not spinning issue is still not fixed, then it is possible that the drum axle has been worn out. This usually happens when the drum rollers are blocked or worn out, and the dryer’s motor gets overloaded.

The worn-out drum axles can cause various issues apart from Samsung Dryer not spinning issues. For instance, worn-out drum axles can bind up at specific points in the rotation.

The drum axle can also be worn out because of the heat, dust, and overuse of the dryer. However, a worn-out drum axle can be easily fixed. You simply need to add more lubrication oil to the drum axle, and it will start functioning again.

However, in some cases, the drum axle gets rusted, due to which they won’t work. So, you have to replace them completely. New drum axles can be bought online or from a local store for $30 to $40, depending upon the model.

9. Worn Out Drum Bearings

Most Samsung dryer comes with drums that have bearings in them.

The drum bearings are what support the drum and allow it to spin. Bearings are used most of the time whenever you use your dryer.

Moreover, bearings are made of up metal which can wear over time due to lack of lubrication.

If the bearing in your Samsung Dryer is worn out, the drum won’t turn, and the Samsung dryer not spinning issue will occur.

If the drum doesn’t turn, you can check the bearings to see if they’re broken.

If so, you’ll need to replace them. The bearings are usually easy to access and replace, but the process can be a bit tricky.

How to replace worn-out drum Bearings in Samsung Dryer?

Unplug the dryer from the power source.
Remove all the screws with a screwdriver from the back panel.
Slide the panel back and lift it off.

Depending on your dryer model, you may need to remove the control panel. Make sure to disconnect the wire harness.
Remove the screws securing the front panel.
Open the door and remove the remaining screws.

Pull out the front panel and disconnect the wire.
You will also have to remove the blower housing screws and moisture sensor wire harness.
Take out the drum carefully and replace the old bearings with a new ones.

Now follow the steps in reverse and place everything back into its place.
Carefully tighten all the screws and check to see if the Samsung dryer is working or not.

10. Drum Glide Has Stopped Working

A Samsung Dryer contains a lot of components, and one such component is called glide.

If the drum glide wears out, the Samsung dryer not spinning issue will occur. The drum glide usually wears out because of the overuse of the dryer.

The drum glides are made up of rubber or silicone material and are readily available in a local shop.

Drum glides are not as durable as other components, due to which they wear out quickly.

You can simply replace them and install new drum glides in their place to fix the Samsung dryer not spinning issue.

11. Child Lock is On

Last but not least, if you are still facing Samsung Dryer not spinning issue, then it is probably because the child lock has been turned on by a child or accidentally by you.

If the child lock is no, no matter what you will do, the dryer will not spin.

The easiest way to check for a child lock is by looking at the display of the dryer.

If you see a lock icon on the screen, this means the child lock is on.

To turn off the child lock in the Samsung dryer, you need to press a combination of two buttons which is defined in the user manual of the dryer.

The button combination can be different depending upon the model of your dryer.

But in most Samsung dryers, you need to press the combination of Temperature and Time at the same time.

As soon as you hear a beeping sound, leave the buttons, and the child lock is now turned off. In the same way, the child lock can be turned on.

May Required in Future:

Conclusion

Unfortunately, there appears to be a manufacturing error in some Samsung dryers that causes them to stop spinning. However, with this guide, hopefully, you can resolve the Samsung dryer not spinning issue.

Most of the issues are well known and can be easily resolved if you have some technical knowledge of how everything works. However, if you don’t want to mess things up inside the dryer unit, then you should call Samsung’s technical support, and they will help you out.

11 Reasons of Why My Samsung Dryer Not Spinning [Fixed]