Whirlpool dryers are one of the best laundry dryers in the industry.

Whether it builds quality, features, or affordability, they top the chart in every segment.

However, there are various errors that occur from time to time in the Whirlpool dryers.

But most of the errors can be resolved with the help of a user guide. There are some error codes that are rare and not easy to resolve.

One of those error codes is the F3E2 Whirlpool dryer code.

Below we have prepared a comprehensive guide to help you fix the F3E2 Whirlpool dryer code. Have a look!

What is F3E2 Whirlpool Dryer Code?

The F3E2 is a whirlpool dryer error code that occurs when the moisture sensor fails to work.

The moisture sensor is one of the most crucial components of the Whirlpool dryers, and if it fails to work, then the clothes won’t come out dry.

Moreover, the machine may not work as intended.

The moisture sensor helps in detecting the moisture level in the dryer.

Moreover, it helps the machine in adjusting the time and dry cycle according to the moisture level.

If there is a high amount of moisture present in the clothes, then it will adjust the timer to dry clothes in more time.

However, if there is very less moisture in the clothes, it will reduce the dry cycle time accordingly.

As soon as you put the clothes inside the machine, the moisture sensor is one of the first components that begins the dry cycle, so if you see the F3E2 Whirlpool dryer code,

it means that the moisture sensor is not working and you need to get it fixed.

On top of that, if the moisture sensor is working fine and it is failing to register the moisture data, then it will also cause the Whirlpool dryer error code F3E2.

Most of the time, this issue gets resolved just by restarting the dryer. However, if it doesn’t get resolved, follow the tips given below.

Faulty Moisture Sensor

The first and most probable cause of the F3E2 Whirlpool dryer code is a faulty or malfunctioning moisture sensor.

If the moisture sensor fails to work, the dryer will release unnecessary heat, resulting in dampened clothes.

Before attempting to fix the moisture sensor in your Whirlpool dryer or calling customer service, you need to try some basic troubleshooting tips.

Restarting the Dryer: First thing first, when you see the F3E2 Whirlpool dryer code, turn off the dryer, and take the plug out of the power outlet. Replug and turn it on and check if it resolves the issue or not.

Resetting the dryer: If the restart doesn’t resolve the issue, then you may need to reset the dryer. Resetting the whirlpool dryer is quite simple and straightforward. But before you do that, make sure to check the user manual. It will have all the steps to reset the dryer.

1.   First of all, disconnect the dryer from power.

2.   After that, wait for a few minutes and replug the dryer into the power outlet.

3.   It will reset itself. In case it doesn’t, then you need to make sure that you do these steps by turning off the breakers.

Check User Manual: The next thing to do when you get the F3E2 Whirlpool dryer error code is to check the user manual. We recommend you check the user manual because the steps to fix the error code F3E2 may vary depending on the dryer model you have.

Replacing the Moisture Sensor: Next, you need to check the moisture sensor for any shorting or opening. The moisture sensor of the whirlpool dryer is located on the front of the dryer. If it is faulty, you need to replace it completely. To access the moisture sensor and replace it, follow the steps:

1. Turn off the whirlpool dryer and take out the plug from the power outlet.
2. Next, open the dryer’s door and take out the lint screen.
3. You can use any screwdriver to unthread the screws on the front of the lint screen hosting.
4. Next, unthread the screws inside the dryer’s drum that is holding the housing in the dryer.
5. After removing all the screws, pull out the lint screen first and then disconnect the moisture sensor wires, which connect it to the back of the dryer.
6. Make sure to take photographs of the wiring, as it can be confusing later when you have to reconnect the wires.
7. After taking out the lint screen, place it on a flat surface and use any needle of nose pliers to push the sensor bar that holds the sensor in the lint screen housing.
8. Gently pull off the sensor from the lint screen housing.
9. Now, take out the new sensor and put it on the lint screen.
10. Gently push the new moisture sensor into the lint screen to fit in its place.
11. Now, place the lint screen back into the dryer and reconnect the moisture sensor wiring. See the photographs to reinstate the wiring.
12. Once that’s done, place everything back into the dryer and tighten all the screws.
13. Turn on the dryer and see if the error code still exists.

Perform Cycle Power

If you are still facing the F3E2 Whirlpool dryer error code, then it could be due to stuck cycle power, which can be fixed within a minute.

You can perform a cycle power to fix this error code. Here’s how:

1. First of all, turn off the dryer and take out the plug from the outlet.
2. Turn off the circuit breaker for a minute or two, and then turn it back on.
3. Check whether the error code has disappeared after powering up the dryer.
4. If it’s not gone, then power steps 1,2 and 3. Then, you need to start the time-dry cycle for one minute and notify the dryer of any error code.
5. The error code will be resolved now, but if not resolved yet, then follow the next method.

Level the Dryer

Whether it is a washing machine, washer, or dryer, all of them are subject to rocking and tilting while operating.

So, if they are off-balance during operation, they will probably stop working. Or if they are modern machines, they will throw an error code on the screen.

If the dryer has occasional wobbles, then it won’t get dryer in any way. However, if the dryer is unlevel, the laundry inside the drum may never get dryer as expected.

If you have tried other steps and still getting the F3E2 error code, then it is probably because your Whirlpool dryer is unlevel, and you need to level it to fix the error code.

Levelling the dryer is simple and straightforward. Most of the whirlpool dryer legs are adjustable, and if the dryer is slightly off-balance, then you can use a wrench that comes with the dryer to adjust the legs and fix the wobbling issue.

Additionally, you can move your dryer to a level ground surface and check if the error code still persists.

Increase the Load

If you are using your Whirlpool dryer with a very small load, then it will probably not work and throw the error code F3E2 as the moisture sensor may not be able to detect the moisture due to a very less load.

This issue doesn’t take place in all models of Whirlpool dryers. Only some old models of the Whirlpool dryer are prone to issue error codes.

If you are using only one or two clothes in the dryer, you need to increase the load to fix the error code,

which will help the moisture sensor to detect the moisture and resolve the error code.

If you are facing the F3E2 Whirlpool dryer code while trying to dry one or two clothes, then try adding more clothes one by one, and it will fix the error code.

• Why My Whirlpool Dryer Not Heating Up [Solution]
• How to Fix Whirlpool Dryer F70 Error Code [Solved] 
• 12 Reasons Why Whirlpool Dryer Won’t Start [Solved] 
• How to Fix Whirlpool Cabrio Dryer AF Code [Solution] 

Conclusion

So, there is everything you need to know about the F3E2 Whirlpool dryer code. Hopefully, you will be able to fix the error code based on the guide above. This error code is easy to fix and most common in Whirlpool dryers.

Before doing anything, you must restart the dryer, then reset the dryer, and then head over to the user manual for any help. If it doesn’t resolve your issue, then try the methods given above.

Make sure the dryer is levelled with the ground surface and is not wobbling. Also, ensure that you are not drying just one or two clothes, due to which the moisture sensor is not detecting the moisture and is causing the error code F3E2.

Frequently Asked Questions